Blocked drain can be a hassle, but using a drain snake can help clear them quickly. This handy tool is ideal for homeowners looking to tackle blockages without calling a plumber. Here’s a step-by-step guide to effectively using a drain snake:

1. Insert the Drain Snake

Start by manually feeding the auger end of the drain snake into the blocked drain. Slowly guide the wire down, allowing the snake to navigate the twists and turns of the pipe until it reaches the blockage.

2. Locate the Blockage

Keep pushing the snake down the drain. As you guide the snake around bends and curves, apply gentle pressure while turning the handle. If the handle becomes difficult to turn, you’ve likely reached the blockage. Be careful not to force the snake, as this can damage your pipes.

3. Break Up the Blockage

Once you feel the resistance of the blockage, begin rotating the handle of the drain snake back and forth. This action causes the auger tip to break up and clear away the obstruction. Continue this process until the resistance decreases and the snake can move further through the pipe.

4. Complete the Clearing Process

When you feel no more resistance and the water flows freely, it means the blockage is cleared. Run water to confirm the drain is open, then carefully retract the snake. Clean the auger tip and dispose of any debris collected on it.

Need Professional Assistance?

Learning to use a drain snake can save you time and money. However, for stubborn blockages or a more thorough clean, Chester Plumbing Co. offers professional services with state-of-the-art equipment to ensure your drains are clear and your plumbing is in top shape. Don’t hesitate to reach out for expert help!

About The Author

sidebar-cta-repairs
sidebar-cta-careplan
sidebar-cta-installations

Comments

More Posts You May Find Interesting